DIY Jewelry Display

by remembersarah18

I received a few new beautiful necklaces for Christmas and I really wanted to have a pretty way to display them- for cheap 😉

I used all items I already had, so this project cost me $0! Yay!

What you’ll need:
• a piece of wood (you could use anything you already have on hand, I used a 1×4″ piece about 12″ long)
• sandpaper
• 12 white hooks (you could also use thumb tacks)
• paint, paintbrush
• picture frame brackets and nails
• hammer
• drill and tiny drill bit (if you’re using hooks)

First thing you want to do is measure the center of your wood piece. Mark it, and then divide each half in half. So mark your two centers. These will be where you attach your brackets. You need two so it doesn’t go all uneven when you hang your necklace on one side.

20140122-224250.jpg

I had my wood already sanded and painted, but if you wanted, it would probably be easier to paint it after you drill your holes. So with my wood ready, I took my tiniest drill bit and drilled holes in a straight line all along my wood exactly 1″ apart (mark them with a pencil first! 🙂 ). Drilling makes it much easier to twist the hooks in.

20140122-223913.jpg

20140122-223929.jpg

20140122-224016.jpg

I designed this display with room at the top to write a quote. I chose Psalm 45:11 and penciled it out first to make sure it would fit like I wanted. Then I went over it in a white chalk pencil. Even though I didn’t paint it in chalkboard paint, you could definitely do that!

Once you’ve got your brackets on, holes drilled, wood sanded and painted, hooks in, and (if you want) quote written, you’re ready to hang it up! Display your favorite necklaces with pride on your new jewelry display!

20140122-224055.jpg
20140122-224238.jpg

Stay beautiful!
Sarah

Advertisements